
Add to Cart
744253101Common Mode Line Filter to Suppression of common mode noise
D Electrical Properties:
Properties | Test conditions | Value | Unit | Tol. | |
Inductance | 100 kHz/ 100 mV | L | 3x 100 | μH | +50/-30% |
Inductance | Zmax | 5000 | Ω | typ. | |
Rated current | 100 kHz/ 100 mV | IR | 450 | mA | max. |
DC Resistance | RDC | 3x 0.45 | Ω | max. | |
Leakage inductance | 1 MHz/ 1 mA | LS | 94 | nH | typ. |
Insulation test voltage | UT | 500 | V (AC) | max. | |
Rated voltage | UR | 80 | V | max. |
E General information:
It is recommended that the temperature of the part does not exceed 125°C
under worst case operating conditions.
•Ambient temperature: -40°C to +85°C (refering to IR)
•Operating temperature: -40°C to +125°C
•Storage temperature (on tape & reel): -20°C to +40°C; 75% RH max.
•Test conditions of Electrical Properties: 20°C, 33% RH
if not specified differently